S-R1Attaching very quickly via a thumbscrew, the Round Head Magnetic Modifier Adapter is the base component of a magnetic system that attaches simply and quickly to square-shaped speedlights from Godox, Nikon, Canon, and Sony.
Secure GripThe S-R1 adapter slides onto rectangular flash heads to provide a round magnetic mounting point. Gridded rubber mats on the inside surface of the adapter provide scratch-free grip, and a knurled knob on top helps tighten the adapter around flashes of different sizes.
Fast, Magnetic MountingRound magnetic modifier attaches to most square-shaped flashes such as Godox series: - Godox V860II - V850II - TT685 - TT600 - and other Nikon, Canon, and Sony flash units
CooperationThanks to the S-R1, you can use the AK-R1 set also in units with a rectangular flashes quickly to the front of the adapter via magnets. Separately available accessories opens the way for you to modifiers such as barndoors, a dome, a honeycomb grid, a snoot, bounce card, and gel filters.
The Godox TT685 is a solid flash light with a guide number of 60 that fits perfectly with any digital camera. Despite its small size, the flash head rotates 360º horizontally and 97º vertically.
The lamp has built-in transmitter with Godox X...
The lamp has a built-in Godox X system transmitter which can be used as a controller (Master) with other lamps which also support the Godox X system. It is possible to switch it into the Slave mode in which you can control it remotely from the...
AK-R1Godox AK-R1 includes magnetically attached modifiers that maximize the capabilities of the circular flash head.
CompatibilityThe accessories from the set are compatible with lamps such as AD100Pro, H200R (AD200 / 200Pro), V1, R1 RGB,...
The principle of Godox's policy is to create products that meet all quality standards. Before introducing a product to the market, we subject it to numerous tests and controls, thanks to which we are sure that the introduced product will function flawlessly. Each product is covered by a guarantee and warranty in accordance with applicable law,
Terms of warranty:
The warranty time is:
24 months for consumers, 12 months for companies, excluding the following assortment:
3 months - burners and light bulbs
6 months - batteries
The warranty covers only damage and defects resulting from reasons inherent in the sold device.
The warranty does not cover:
mechanical damage and defects caused by them
damage resulting from improper use or storage of the product not in accordance with the user manual and safety regulations
damage caused by external factors such as flooding with liquid, moisture, too high or too low temperature, atmospheric discharges, chemical agents, and other factors beyond the Guarantor's control
damage resulting from unauthorized repairs and alterations
damage resulting from natural wear and tear, such as: scratches, dirt, abrasions
The customer may be charged with the costs of transport and diagnosis of the product if the product sent as part of the warranty complaint is functional or its defects result from improper use of the product.
Defects that occur during the warranty period will be repaired free of charge, as soon as possible, which should not exceed 14 days from the date of accepting the equipment for repair. The deadline may be extended if the repair requires the import of spare parts and other random situations beyond the control of Godox.
Godox is not responsible for financial losses and other civil law consequences caused by a defect in the advertised device (loss of profit, turnover, inability to conduct business).
If it is necessary to deliver the equipment to the service, the Customer is obliged to send the equipment in a properly secured packaging with fillers so that there is no risk of damage to the equipment during transport. In the event of damage, the costs are borne by the customer. Cash on delivery parcels will not be accepted. Service requests can be made directly on the website or in person at the point of purchase of the product.
Contact with the service:
F-SERVICE ul. Płk Dąbka 17 30-732 Kraków email: email@example.com tel. 122701281
In the case of returns, please send the goods to the following address:
GODOX ul. Bonarka 11 30-415 Kraków email: firstname.lastname@example.org tel. 12 357 66 05
No customer reviews for the moment.
Your review appreciation cannot be sent
Are you sure that you want to report this comment?
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Your comment has been submitted and will be available once approved by a moderator.
SA-P1SA-P Projection Attachment gives the ability to project a controlled beam of light, with three options of the lens (lenses are not included and must be purchased separately).
ApplicationIdeal for precise and selective lighting of the...
CB-22The TL30 Carrying Case holds 2 TL30 tubes with accessories is a compact case for carrying all the components of the TL30 LED 2-Light Kit. The zippered case features individual compartments and a carrying handle.
CapacityThe CB-22 is...
P128-D2The diffuser attaches to the front of the reflector and absorbs 1 degree of light while minimizing harsh shadows and softening the character of the light. A D1 version is also available, which absorbs only 0.5 degrees of light and...
Versatile and compactThe kit includes 5 frames with flags and fabric screens for mounting to shape, block or diffuse light, as well as smaller modifiers (2 strips and 2 circles) for more precise light control on small subjects....
The holder supports gobos with patterns etched in them, which are then projected onto the scenery and can create fancy lighting effects. Godox SA-10 Gobo Holder slides into the separately purchased Godox SA-P1 projection cap. The set works with...
CompatibilityThe modifiers work with the Godox SA-P1 projection attachment and the Godox S30 LED lamp.
SizeThe Gobos are 3" (7,5cm) diameter.
CaseThe set also includes a case with compartments for scrim set.
In package: - Full...
V-11TA set of gel filters used to adjust the color temperature of the flash. Godox has developed a set of advanced gel filters to help photographers adjust the color balance of daylight, or to warm or cool color of flash light.
RFT-21SDesigned for R1200, the RFT-21 Reflector can spread the light out, illuminate a larger area than the ring flash head itself and soften the shadows.
Silver coatingGodox offers two dedicated reflectors (silver and white coating). The...
P128-D1It fastens to the front of the reflector and absorbs 0.5 stops of light while while minimizing harsh shadows and softening the character of the light. A D2 version is also available which absorbs 1 degree of light and softens the light...
SN02Snoot Godox SN02 is an essential accessory for light modeling. Perfect for lighting your hair or creating a dramatic lighting accent. Very concentrated light source.
CompatibilitySnoot designed to lamps which has a collar with a...
P68-D1It fastens to the front of the reflector and absorbs 0.5 stops of light while while minimizing harsh shadows and softening the character of the light. A D2 version is also available which absorbs 1 degree of light and softens the light...
P158-D2The diffuser attaches to the front of the reflector and absorbs 1 degree of light while minimizing harsh shadows and softening the character of the light. A D1 version is also available, which absorbs only 0.5 degrees of light and...
Uniform light intensityThe light output from the VSA is characterized by a consistent intensity with no change in color or brightness from the center to the edge. The system has been optimized to emit ideal light beams.
Sharp edgesUsing a...
V-11CAdd a touch of color and style to your lighting with an artistic set of gel filters.
ApplicationThese color gels filters can change the color of the light to provide color light for background, designed for Godox V1 series and...