RFT-2Reflector used to illuminate the background. The interior of the reflector is finished with a silver surface with an irregular texture, which diffuses the light evenly. The outer surface is black which reduces unnecessary reflections.
ApplicationThe reflector is cut, which allows you to position the lamp on the side of the plan. Fits all flash and continuous lighting that use the Bowens mount.
Included:- Godox RFT-2 reflector - Original packaging
Godox GS series has a flash energy adjustment range within 5 degrees of aperture (1/1 - 1/32, with an accuracy of 0.1 EV). Recycle time to full flash energy less than 1 seconds. At minimal power, it achieves a very short flash duration of only...
Godox QT series are available in several power versions up to 1200Ws, they are characterized by a range of flash energy regulation in the range of 7 degrees of aperture (1/1 - 1/128, with an accuracy of 0.1 EV). Recycle time to full flash energy...
DP400 IIITogether with the built-in System X receiver, the improved version of the DP400 lamp ensures faster charging power is variable from 1/64 to full power, while the DP400III's 150W modeling can be set to a percentage or proportional to...
The principle of Godox's policy is to create products that meet all quality standards. Before introducing a product to the market, we subject it to numerous tests and controls, thanks to which we are sure that the introduced product will function flawlessly. Each product is covered by a guarantee and warranty in accordance with applicable law,
Terms of warranty:
The warranty time is:
24 months for consumers, 12 months for companies, excluding the following assortment:
3 months - burners and light bulbs
6 months - batteries
The warranty covers only damage and defects resulting from reasons inherent in the sold device.
The warranty does not cover:
mechanical damage and defects caused by them
damage resulting from improper use or storage of the product not in accordance with the user manual and safety regulations
damage caused by external factors such as flooding with liquid, moisture, too high or too low temperature, atmospheric discharges, chemical agents, and other factors beyond the Guarantor's control
damage resulting from unauthorized repairs and alterations
damage resulting from natural wear and tear, such as: scratches, dirt, abrasions
The customer may be charged with the costs of transport and diagnosis of the product if the product sent as part of the warranty complaint is functional or its defects result from improper use of the product.
Defects that occur during the warranty period will be repaired free of charge, as soon as possible, which should not exceed 14 days from the date of accepting the equipment for repair. The deadline may be extended if the repair requires the import of spare parts and other random situations beyond the control of Godox.
Godox is not responsible for financial losses and other civil law consequences caused by a defect in the advertised device (loss of profit, turnover, inability to conduct business).
If it is necessary to deliver the equipment to the service, the Customer is obliged to send the equipment in a properly secured packaging with fillers so that there is no risk of damage to the equipment during transport. In the event of damage, the costs are borne by the customer. Cash on delivery parcels will not be accepted. Service requests can be made directly on the website or in person at the point of purchase of the product.
Contact with the service:
F-SERVICE ul. Płk Dąbka 17 30-732 Kraków email: email@example.com tel. 122701281
In the case of returns, please send the goods to the following address:
GODOX ul. Bonarka 11 30-415 Kraków email: firstname.lastname@example.org tel. 12 357 66 05
No customer reviews for the moment.
Your review appreciation cannot be sent
Are you sure that you want to report this comment?
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Your comment has been submitted and will be available once approved by a moderator.
RFT-14 8cm reflector designed for Godox lamps or other flash heads with Bowens mount. The reflector has a 60-degree light beam span.
Smart designSuitable for Grid installation (not included).
Included: - Godox RFT-14 - Original...
The 7" Standard Reflector from Godox features a Bowens S-style mount, allowing it to fit studio strobes, location battery strobes, LED monolights, and select fluorescent light units which receive Bowens modifiers. The reflector is made of...
Godox AD-R14This reflector has Godox Mount that is perfect for Godox AD300PRO, Godox AD400PRO or Godox ML60
Accepts Grids: Yes
Umbrella Mount: No
RFT-13This 8.3" (21cm) Standard Reflector has a 65° beam spread for distributing light generated by a compatible head.
Set contains: - Godox RFT-13- Original Packaging
Key Features: Shape: CircularInterior: Silver Mount: Bowens...
RFT-17This 5.9" (15cm) Umbrella Reflector has a 110° beam spread for distributing light generated by a compatible head into an umbrella.
User-friendly designIt features built-in umbrella mount. When working with umbrella, it brings about...
RFT-18Used for backlighting. Delivers a graduated oval of light on the background. Included clips can be used to attach gels, filters or diffusion material and help to create special effects. An ideal light pattern especially for portrait....
RFT-1This 15cm standard reflector gives a strong and focused light when used with a compatible lamp. There is a hole for an umbrella in the reflector.
RFT-4The 12" Wide Angle Reflector from Godox has a 120-degree wide beam angle and produces even light that's well-suited to portraits, beauty subjects, large groups, and spaces.
BowensReflector has a Bowens accessory mount that fits Godox...
RFT-3Godox RFT-3 is a small reflector designed for Godox lamps and flash heads from other manufacturers equipped with a Bowens mount. The 13 cm diameter reflector provides a 35° light beam angle which is ideal for evenly distributing the light...
AD-R12AD-R12 Godox-mount Long Focus Reflector is excellent for shooting the object’s shape and outline.
ApplicationAdding a AD-R12 reflector to your studio light helps control the lighting angle and focus the light. Perfect for photography...