Studio flash Godox QT1200IIM
  • Studio flash Godox QT1200IIM
  • Studio flash Godox QT1200IIM
  • Studio flash Godox QT1200IIM
  • Studio flash Godox QT1200IIM
  • Studio flash Godox QT1200IIM

Studio flash Godox QT1200IIM

€849.00
VAT included
Quantity
Available

Godox QT series are professional studio flashes with a compact and durable construction and almost unlimited possibilities. Power regulation from 1/128 to 1/1, very short recycle time, 150W modeling light has a proportional mode to allow you to preview your lighting effects and a percentage mode that adjusts brightness from 5 to 100%. or just turn off. Strobe flash, HSS, Stable Color Temperature mode, built-in System X receiver completes the huge functionality of the lamp.

Godox QT series are available in several power versions up to 1200Ws, they are characterized by a range of flash energy regulation in the range of 7 degrees of aperture (1/1 - 1/128, with an accuracy of 0.1 EV). Recycle time to full flash energy in less than 0.9 seconds. At minimal power, it achieves a very short flash duration of only 1 / 28984s, which allows free shooting during sessions. The flash color temperature is 5600K and may fluctuate within ± 200K depending on the flash energy set. We have several lamp modes at our disposal, of which the Stable Color Temperature deserves attention.

Built-in System X receiver enables remote flash firing (until X-Sync), flash energy control and many more. In addition, Godox QT series is equipped with a USB connector that allows you to connect receivers of the XT16, FT-16 or X1 TTL system. It is also possible to use the 3.5 mm Jack socket and connect the lamp with triggers of other brands.

Back panel of the lamp is simple and functional. The LCD screen showing the lamp settings is also easy to read from a large angle. Next to it is a handy knob for adjusting the flash output, changing the radio communication channel and the group of lamps. Placed under the LCD screen a series of five buttons gives quick access to all settings and functions of the lamp. The 150 W halogen pilot light can operate independently of the flash output (brightness can be set manually), or be coupled with flash energy (proportional). In addition, it can be turned off automatically for a flash or stay on without interruption.

With the lamp you can use a wide range of light modifiers, such as: bowls, softboxes, spotlights, beauty disheres, and others are fitted with Bowens accessories.

The set contains:

  • Godox QT1200IIM lamp
  • power cable
  • standard reflector
  • modeling lamp
  • flashtube cover
  • original packaging

Seller warranty:

  • 2 years (Flash tube and bulbs are covered by a 3-month warranty)
5117
6952344210864
Series
QT
Fitting type
Bowens
Power in Ws
1200
Power control
smooth adjustment , system X
Power adjustment
1 - 1/128
Triggering
test button , System X , sync cord , optical
Triggering options
M / S1 / S2 / Slave
Recycle time in sec
0.9
Colour Temperature (K) +/- 200K
High-Speed Flash Mode: 5400K~9000K , Stable Color Temperature Mode: 5600±200K , High-Speed Sync Flash Mode: 4600K~5000K
Modeling light
150W
Flash duration
High-Speed Flash Mode: 1/316s -1/28984s , Stable Color Temperature Mode: 1/316s -1/4246s
HSS
yes
Stroboscopic flash
yes
Groups/Channels
16/32
Cooling
active
Display
LCD
Power Supply
AC 230V 50/60Hz
Dimensions in cm
41 x 23 x 14
Weight (in kg)
4.3

The principle of Godox's policy is to create products that meet all quality standards. Before introducing a product to the market, we subject it to numerous tests and controls, thanks to which we are sure that the introduced product will function flawlessly. Each product is covered by a guarantee and warranty in accordance with applicable law,

Terms of warranty:

The warranty time is:

  • 12 months, excluding the following assortment:
  •  3 months - burners and light bulbs
  •  6 months - batteries


The warranty covers only damage and defects resulting from reasons inherent in the sold device.

The warranty does not cover:

  • mechanical damage and defects caused by them
  • damage resulting from improper use or storage of the product not in accordance with the user manual and safety regulations
  • damage caused by external factors such as flooding with liquid, moisture, too high or too low temperature, atmospheric discharges, chemical agents, and other factors beyond the Guarantor's control
  • damage resulting from unauthorized repairs and alterations
  • damage resulting from natural wear and tear, such as: scratches, dirt, abrasions

The customer may be charged with the costs of transport and diagnosis of the product if the product sent as part of the warranty complaint is functional or its defects result from improper use of the product.

Defects that occur during the warranty period will be repaired free of charge, as soon as possible, which should not exceed 14 days from the date of accepting the equipment for repair. The deadline may be extended if the repair requires the import of spare parts and other random situations beyond the control of Godox.

Godox is not responsible for financial losses and other civil law consequences caused by a defect in the advertised device (loss of profit, turnover, inability to conduct business).

If it is necessary to deliver the equipment to the service, the Customer is obliged to send the equipment in a properly secured packaging with fillers so that there is no risk of damage to the equipment during transport. In the event of damage, the costs are borne by the customer. Cash on delivery parcels will not be accepted. Service requests can be made directly on the website or in person at the point of purchase of the product.

Contact with the service:

F-SERVICE
ul. Płk Dąbka 17
30-732 Kraków
email: service@f-service.pl
tel. 122701281

In the case of returns, please send the goods to the following address:

GODOX
ul. Bonarka 11
30-415 Kraków
email: store@godox.eu
tel. 12 357 66 05